An FDA-cleared, biocompatible, and photocurable material. Performance and strength are the same as conventional acrylic. To obtain the guaranteed results, this resin is to be used in conjunction with DENTCA Denture Base II resin for manufacturing 100% 3D-printed, removable dentures. Available only in 1 Kg.
Specifications Before Curing:
Viscosity at 25+/-0.5°C: 1000 cps and 2000 cps
Density: 1.05 Gm./cm³ and 1.2 Gm./cm³
Specifications After Curing:
Density: 1.15 Gm./cm³ and 1.25 Gm./cm³
Flexural strength: 50 MPa
Degree of conversion: 70%