DESS Dental Smart Solutions® now available from Zahn Dental offers a wide range of compatible prosthetic components that can be used with leading brands in the dental industry. The "Pure Switch Concept" according to which their products are conceived, ensures full compatibility and interchangeability of the components at any stage of the restoration while guaranteeing the seamless interchangeability allowing use of the same tools or routines. All abutments are tested to guarantee their correct functioning.
Buy Now View Component Catalog Get CAD Libraries Browse Components Compatible Scan Abutments
DESS® products are conceived based on the Pure Switch philosophy, which means they can seamlessly be used to replace the OEM's. The interchangeability ingrained in this concept gives the professional a great deal of flexibility, as they can use both the original product and the DESS® product without losing any of its features.
The Pure Switch responds to the need to create a prosthetic solution that can fully replace the original without compromising the quality or strength of the product. All DESS® abutments are tested to guarantee their correct functioning.
Following this idea, the backbone of the Pure Switch concept is the DESS® screw, as it is identical to the original and perfectly interchangeable. Below you can see a perfect comparison between two screws.
The geometry of our screws is the same as the original ones. This includes the footprint for the original screwdriver tip, seat angle, diameter, length, metric, above others.
The material used to produce DESS screws is Titanium grade 5 obtained through cold work, which gives them greater resistance to masticatory loads. Also, some of them have different surface finishes, like TIN or DLC, to avoid loosening. All DESS® screws are tested to verify their proper performance. The resistance test applied to the screws is a 50% above their real use torque.
*Replacement of all DESS® parts and if the implant manufacturer will not honor their warranty because DESS® component have been used. DESS® will reimburse you the component cost of the failed implant.
More Information and Ordering
Compatible with STRAUMANN® SOFT TISSUE LEVEL & synOCTA®
Compatible with STRAUMANN® BONE LEVEL
Compatible with CAMLOG®
Compatible with NOBELACTIVE® & NOBELREPLACE® CC
Compatible with NOBEL REPLACE SELECT™
Compatible with NOBEL BRÅNEMARK®
Compatible with 3i OSSEOTITE®
Compatible with 3i CERTAIN®
Compatible with ZIMMER SCREW-VENT®
Compatible with ASTRA TECH IMPLANT SYSTEM™ EV
Compatible with ASTRA TECH OSSEOSPEED™
Compatible with DENTSPLY FRIADENT XIVE®
Compatible with DENTSPLY ANKYLOS® C/X
Compatible with OSSTEM® TS
Compatible with CONELOG®
Compatible with BIOHORIZONS® INTERN
Compatible with BIOHORIZONS® EXTERNAL
Compatible with MIS® SEVEN
Compatible with MIS® C1
Compatible with MIS® V3
Compatible with MEGAGEN AnyRidge®
Compatible with ANTHOGYR AXIOM®
Compatible with MEDENTIS ICX®
Compatible with GLOBALD IN-KONE®
Compatible with DENTIUM SUPERLINETM & IMPLANTIUM®
Compatible with BEGO Semados®
Compatible with BIOTECH KONTACT®
Compatible with BTI®
DESS® Analogs reproduce the implant system connection with unique precision while also being color coded to match precisely to the original implant system enabling technicians to save time be easy platform recognition. Analogs feature a self-locking holder in a cross shape which guarantees an extraordinary connection in the plaster even when milling supports on the working model.
Order Now
DESS digital analogs are precision-engineered from top-quality materials such as AiSi 303 Stainless Steel or Titanium Grade 5 ELI GAL V grade 23 (anodized). With color-coded platforms that match the implant platform, these analogs are designed for easy recognition.
Their remarkable fixation capabilities ensure maximum precision even in the case of milled abutments on plaster or 3D printed models. Thanks to a discreet size and fixation screw on the underside, the analogs can be easily placed in even the smallest and most uneven interdental spaces.
The DESSLoc® abutments provide dental technicians with a reliable solution for complete implant overdenture restorations. The DESSLoc® advantages comes from the exclusive coating* of Zirconia Nitride (ZrN), a fully biocompatible material which increases the hardness of the abutment surface.
DESS healing abutments are a biocompatible and cost-effective solution for gingival healing and adaptation. They are manufactured in different heights and available with leading implant systems to deliver total flexibility while providing a perfect fitting prosthesis. All healing abutments are made of Grade 5 ELI Titanium and contain laser markings to easily handle and identify the measures as well as the implant platform, reducing the risk of mixing.
DESS Multi-Unit Abutments are manufactured using Pure Switch technology with additional features that optimize strength and handling for screw retained prosthetics. They are available in a variety of connections and versions consisting of straight non-engaging and angled engaging heights to accommodate different gingival thickness.
Order Uniabutments Order Multi-Unit Abutments
DESS® Pre-milled Blanks allow the production of one-piece abutments with in-house milling equipment while maintaining DESS® high quality precision in the important connection geometry. The system includes blanks in either Titanium or CrCo for most implant platforms with a proprietary holder system for Imes-Icore®, VHF®, Yenadent® and other milling machines with standard 98mm holders.
The Pre-milled Blanks are made from Titanium Grade 5 ELI and the exclusive Micro Melt Cobalt-Chrome. This CrCo alloy has several advantages like no internal tension preserving the designed shape and makes less risk for ceramic cracks while also being easier to mill and preserving milling tools.
The holder provides a quick "screw-on" feature where the blanks are attached to the sub-holder outside the machine and placed in the main holder that remains in the machine. The individual blanks are attached to the holder using a "pull down and lock" system that is time-saving and will assure maximum precision and stability during the milling process.
The Intraoral Scan Abutments from DESS are spray free due to the sandblasting treatment (SelectGrip® technology) done during the manufacturing process, which allows for a perfect finish and better radiopacity. Their surface is enhanced with ZrN coating that improves resistance and durability. The radiopaque Zirconia material that can be tightened by hand or with a special tool (included with the intraoral scan abutment).
Eliminating the screw hole from the scan abutment design also eliminates the need to use a screwdriver, eliminates any scan distortion and the captive screw facilitates easy and safe manual positioning, cleaning, and autoclaving.
The Desktop Scan Abutments from DESS are manufactured in a durable and radiopaque PEEK material and features the SelectGrip® technology, an enhanced retention surface treatment that improves overall retention up to 500%. The scan abutments higher position orientation shape provides technician with maximum visibility. Eliminating the screw hole from the scan abutment design also eliminates the need to use a screwdriver, eliminates any scan distortion and the captive screw facilitates easy and safe manual positioning, cleaning, and autoclaving.
DESS® screws are manufactured using the Pure Switch concept that matches the exact geometry, material, driver and torque values of the branded implant system ensuring a perfect fit. The screws are designed to ensure the perfect fit with both the standard accessories as well as with special CAD/CAM systems for structures, bridges and custom abutments. Also available are longer, different sockets, heads with flat contact face, all these versions aim to improve the structures passivity and fitting.
Some DESS® screws are also available in DLC (Diamond Like Carbon) coated version. In this version the screw is coated with a hard carbon layer to provide a low friction surface, improving the preload of the screw and producing a high clamping force between the abutment and the Implant.
DESS patented screwdrivers combine the best of the parallel & the conical screwdrivers. All DESS screwdrivers are manufactured in Stainless Hardened Steel for increased durability and wear resistance.
DESS® Screwdrivers:
This biocompatible and cost-effective solution for short-term and long-term temporary crowns and bridges contains horizontal grooves designed to save time and increases retention of restorative materials.
DESS TiBases are manufactured using SelectGrip® technology a patented surface lasered treatment that ensures greater adhesion of the structure with the cement. DESS® Ti Base are indicated for use with milled zirconia or final casted metal crowns in metal or zirconia and available in both engaging and nonengaging versions for single and multiple restorations. Dimensions and design ensure a stable union, reinforcing the structure of zirconia in the areas of greatest stress, softening edges and ensuring the service life of the prosthesis.
Models are available in three different gingival heights for most of the implant connections in diameters NP, RP and WP for both, single tooth prosthesis (engaging) and multiple teeth prosthesis, dental bridges and hybrids (non-engaging).
Two different heights are also available for the Multi-Unit® connection:
DESS transfers are designed with a flat face to avoid rotation and design provides better retention inside the silicone to keep the correct position. These transfers can be splinted together, enabling the user to achieve a more precise position of the implant once the tray is removed from the mouth. The optimized shape allows the use for both open and closed trays.
The CrCo (Cobalt-Chrome) interface combined with a castable sleeve is compatible with many casting alloys on the market. The burnout sleeve enables technicians to work directly on the Cobalt-Chrome, that porcelain can be applied to and fired while retaining the quality of the implant connection.
By having engaging and non-engaging versions, both single and multiple unit structures can be made. All can be welded to the CrCo base if they are made also in CrCo.
Castable abutments are an affordable option for single crowns and bridges. Made of a totally castable material for the stable retention of modelling materials, resins or waxes by means of vertical grooves and two flat surfaces that prevents rotating movements during production of the structure or during clinical use. The grooves also allow for the vertical embedding of wax or plastic material, withstanding compressive and traction stress during the production or during clinical use.
The footing area precisely delimits structure preparation. A perfect joint with normal plastic materials. Made of sanitary polyoxymethylene, the same material used to make permanent clinical components, it is totally castable and allows for high-quality machining to ensure suitable shapes and sizes. Designed in diverse diameters, for different implant connections, internal or external and over abutments. Available for single tooth prosthesis (engaging connection) and for multiple teeth prosthesis and dental bridges (non-engaging connections).
The perfect solution where you need to angle the screw channel. Thanks to the uniquely shaped profile an angled screw insertion of up to 25° with full torque can be achieved. The AURUMBase® is made of Titanium Grade 5 ELI and is gold-anodized improving the esthetic demands. SelectGrip® technology is applied to the retention surfaces and the design is incorporated to the official DESS® CAD libraries from 3Shape®, Exocad®, and Dental Wings®.
There are clinical situations where the long-axis of the implant results in an unfavorable location of the screw access hole. To solve this and maintain the screw retrievability the AURUMBase® allow you to move the access hole to a more favorable location by angling the screw channel up to 25° in any direction. This is achieved using a uniquely designed screw and driver that also makes it possible to reach full recommended torque even at maximum angulation. The same screw connection and driver is used for all DESS® platforms which limits the number of components and tools.
Feature and Benefits:
The ELLIPTIBase® has been conceived to achieve a better result on tight spaces. It has been specially designed to be used in cases where there is a small space between teeth, like the anterior teeth section. Until now those clinical cases would present serious challenges with standard Ti-bases. Only available on small platforms (3.0 & 3.5), available in two shaft orientations, flat and corner, depending on the screw channel insertion.
The DESS® C-Base® components are manufactured in Titanium Grade 5 ELI, and with 15 implant compatibilities and more than 180 references, is the most comprehensive offer of compatible Cerec® Ti-bases on the market. The “Pure Switch†concept by DESS® provides dental technicians with an improved solution to be used under the Sirona digital workflow with Sirona® libraries* or available in DESS® libraries for 3Shape, Dental Wings & Exocad.
C-Base® Product Enhancements
DESS® Flat Seat Screws are now your optimal solution for full arch restorations. Flat Seat Screws are designed to provide a more stable, reliable, and aesthetically enhanced solution for full arch restorations. The flat seat also allows better absorption of the superstructures milling divergence and helps with the self-centering of the screw towards the axis of the MUA.
Material: DESS® Screws are made from medical-grade 5 ELI Titanium, ensuring integrity and soundness. They undergo stress tests of up to 150% of their nominal torques, guaranteeing their reliability.
Torque: The torque for DESS® Flat Seat Screws is 15Ncm, providing the ideal balance between secure fixation and ease of use.
Increased Thickness: 1.00mm thickness, 2.5 times thicker than the older version. This increased seat thickness offers more resistance, providing a stable and durable restoration.
DESS® ASC Pre-Milled Blanks are premium materials designed for in-house milling of customized implant abutments. They offer a combination of strength, ease of use, and compatibility with various implant platforms, making them essential for dental labs and professionals.
The ASC Pre-milled blanks are available in Titanium Grade 5 ELI. This material offers the ideal combination of strength and ease of use, making it essential for your dental lab.
Active Hex
Conical BL